Harman Stove Company TLC 2000 Manuel d'utilisateur télécharger pdf (Page 13)



Like all ne equipment, your TLC 2000 requires some

routine maintenance and inspection. Follow the guidelines

in this section to guarantee safe, efcient operation.





The stove’s exterior surface should be dusted periodically

with a soft cloth. For more thorough cleaning, wait until the

stove is cool before using a damp cloth to clean any blemishes.



To avoid a rust build-up on the inner surfaces of the con-

trols, work the controls back and forth several times, during

the summer, or any prolonged period when you are not using

your stove.



The inside of the re chamber should be examined for

damage to the rebrick lining material, and grates. If any

bricks have been damaged, replace them with Harman re-

placement parts.



Creosote - Formation and the need for removal- When

wood is burned slowly, it produces tar and other organic

vapors, which combine with expelled moisture to form

creosote. The creosote vapors condense in a cool chimney

of a slow burning re. As a result,

creosote residue accumulates in

the ue lining. When ignited, this

creosote makes an extremely hot

re. The chimney connector and

chimney must be inspected at least

once every two months during the

heating season to determine if a

creosote build-up has occurred.

If a signicant layer of creosote

has accumulated (3mm or more),

it must be removed to reduce the

risk of a chimney re.

In the event of a chimney re,

call your local re department;

make sure everyone is safely out

of the house. Reduce the air intake

of the stove as much as possible

using the air control lever. Do not

throw water on the re; this can

cause stove damage and create an

even more dangerous situation.

Have your chimney profession-

ally cleaned and inspected before

resuming burning in your stove.



The glass in this unit is a ceramic glass. 5mm X 444mm

X 311 mm. available from your Harman dealer.

If the stove’s glass is cracked or broken, you must replace

it before operating your stove. Remove pieces carefully.

Replace glass only with Harman supplied replacement glass

panels; do not use substitutes.

To replace the glass panel, you will need to remove the

door. To do this, open the door, lift it straight up and place it

on a soft surface.

Carefully remove damaged glass, gasket material, and

hold down clips (set aside).

Referring to the diagram, note how the various compo-

nents of the door system t together. Lay the load door face

down on the soft surface, and install the self adhesive 1/4"

gasket material around the front face of the glass.

Set the glass pane and gasket gently onto the door. Install

the hold down clips and tighten with bolts as shown. Reinstall

door on stove.





Door

Glass Gasket

Glass

Hold Down Clips and

Bolts

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 27 28

Commentaires sur ces manuels

Pas de commentaire

Harman Stove Company TLC 2000 Manuel d'utilisateur Page 13

Commentaires sur ces manuels

Produits connexes et manuels pour Poêles Harman Stove Company TLC 2000